Power Bulge Generic with cut out 31 x 25 x 5 cms
Interested in the White one with cut out - 31 x 25 x 5 cms? Call us now on 07565 109 108 to speak with our friendly advisors and arrange a purchase.
PRODUCT INFO
Size: 31 x 25 x 5 cms. This bulge also has a cut out at the front to allow additional air flow through into the engine.
There is an approx 1 inch lip left on, trim to suit. The dimensions are taken from the inside at the maximum points, the 1 inch lip is not included in the sizes.so has a cut out at the front to allow additional air flow through into the engine.
Fitting: The Bulge can be pop riveted on or alternatively, it can be bonded on using a silicone based adhesive, available at your local Motor Factors, then blended in.
Paint Prep: Firstly, sand the panel down roughly, then apply primer/filler – a rough sand down will ensure the primer/filler keys well. Sand down again to a smooth finish and finally apply top coat, either Cellulose or Two Pack can be used.